基于随机脉宽调制技术的感应电机矢量控制系统研究

随机脉宽调制技术可以使逆变器输出电压的谐波成分均匀地分布在一个较宽的频率范围内,达到抑制噪声和机械振动的目的.把随机脉宽调制技术引入感应电机矢量控制系统中,保证了调速系统的高性能,同时也降低了电机的有色噪声和机械振动.     

履带装甲车辆采用永磁同步电动机驱动研究

为了提高车辆的机动性能,世界各国纷纷开展电传动系统研究。采用永磁同步电动机控制系统作为电传动车辆的驱动系统是可行方案之一。文中建立了永磁同步电动机控制系统的数学模型,提出了适合于履带车辆电传动系统的电机控制策略与方法,并将永磁同步电动机控制系统在履带车辆电传动中应用进行仿真与分析,最后,给出了永磁同步电动机控制系统在装甲车辆电传动中应用可行的结论。     

粘弹性谱随机有限元

发展了一种粘弹性谱随机有限元法(VSSFEM),并将其用于固体火箭发动机装药结构随机分析。基于不可压或近似不可压粘弹性增量有限元方法和正交展开理论,考虑固体推进剂泊松比的随机性,推导了粘弹性谱随机有限元列式,最后对弹性约束的圆柱形中孔药柱进行了随机分析。算例分析表明该方法能够正确有效地进行粘弹性体随机分析。     

复合固体推进剂颗粒填充模型及其统计特性分析

复合固体推进剂属于高填充比颗粒类复合材料,氧化剂和金属颗粒在基体中的随机分布使其在细观尺度具有非均质的特点。从细观尺度研究固体推进剂燃烧及力学性能时,必须考虑颗粒级配、空间分布和种类等因素的影响。采用分子动力学方法,以硝酸酯增塑聚醚高能复合固体推进剂为研究对象,将固体颗粒模型化为球形,生成其在基体内随机分布的颗粒填充模型。利用Monte-Carlo算法模拟计算颗粒填充模型细观结构的两点概率函数,并研究了颗粒填充体积分数、尺寸与级配等参数对其的影响规律。从统计意义上给出具有各态历经性、统计均匀性和各向同性特点的颗粒填充构型最小周期性代表体元尺寸,可有效减小后续研究的计算量,节约计算成本。所构建的推进剂细观几何构型及对最小周期性代表体元尺寸的计算为后续开展复合固体推进剂细观尺度燃烧、燃面处铝团聚及力学性能数值研究奠定了基础。     

Recent advances in catalytic combustion of AP-based composite solid propellants

Composite solid propellants (CSPs) have widely been used as main energy source for propelling the rockets in both space and military applications. Internal ballistic parameters of rockets like characteristic exhaust velocity, specific impulse, thrust, burning rate etc., are measured to assess and control the performance of rocket motors. The burn rate of solid propellants has been considered as most vital parameter for design of solid rocket motors to meet specific mission requirements. The burning rate of solid propellants can be tailored by using different constituents, extent of oxidizer loading and its particle size and more commonly by incorporating suitable combustion catalysts. Various metal oxides (MOs), complexes, metal powders and metal alloys have shown positive catalytic behaviour during the com-bustion of CSPs. These are usually solid-state catalysts that play multiple roles in combustion of CSPs such as reduction in activation energy, enhancement of rate of reaction, modification of sequences in reaction-phase, influence on condensed-phase combustion and participation in combustion process in gas-phase reactions. The application of nanoscale catalysts in CSPs has increased considerably in recent past due to their superior catalytic properties as compared to their bulk-sized counterparts. A large surface-to-volume ratio and quantum size effect of nanocatalysts are considered to be plausible reasons for improving the combustion characteristics of propellants. Several efforts have been made to produce nanoscale combustion catalysts for advanced propellant formulations to improve their energetics. The work done so far is largely scattered. In this review, an effort has been made to introduce various combustion catalysts having at least a metallic entity. Recent developments of nanoscale combustion catalysts with their specific merits are discussed. The combustion chemistry of a typical CSP is briefly discussed for providing a better understanding on role of combustion catalysts in burning rate enhancement. Available information on different types of combustion nanocatalysts is also presented with critical comments.     

伞盘结构对大长径比发动机药柱结构完整性的影响

为了提高大长径比发动机药柱结构完整性水平,基于三维黏弹性有限元法,计算某大长径比固体发动机在温度和内压荷载联合作用下的结构响应;研究伞盘结构及其位置对药柱最大Von Mises应变的影响规律;讨论当伞盘位于药柱中部时,伞盘最大Von Mises应变随伞盘宽度、深度以及顶部圆弧半径比的变化规律。结果表明,伞盘位于药柱中部时可以有效地降低大长径比药柱的最大Von Mises应变,增加伞盘宽度、深度或选取合适的半径比均可降低伞盘结构的最大Von Mises应变。所得结论可为固体发动机设计提供参考。     

分数阶终端滑模控制器在DTC系统中的应用

针对SVPWM调制的永磁同步电机直接转矩控制系统磁链和转矩波动较大的问题,结合非奇异终端滑模和分数阶微积分理论的特点,设计了一种分数阶非奇异终端滑模控制器。结合直接转矩原理和分数阶微积分理论,对误差进行分数阶微分后与误差之和作为滑模面;根据非奇异终端滑模控制原理,在所设计分数阶滑模面的基础上确定了相应的控制律;利用李亚普诺夫定理证明了滑模面的稳定性和可达性。仿真结果表明,该策略能提高系统的动静态性能,可以进一步抑制磁链和转矩波动。     

固体零温零压密度的估算

固体在零温零压下的密度是一个重要的物态参数。本文利用Ｄｅｂｙｅ理论给出了零温零压密度的一种估算方法,并对８２种物质的零温零压密度进行了计算。     

织女一号气象火箭设计中的若干技术

织女一号气象火箭是一种小型无控固体火箭,由于采用了若干先进的技术,使其总体性能达到了国际先进水平。本文介绍了其总体性能,重点介绍了总体方案设计中采用的包括最优推力程序等若干先进技术。     

多次点火固体火箭发动机在面空导弹上的应用研究

论述了多次点火固体火箭发动机的多次点火的最佳控制,具体研究了两次点火固体火箭发动机的参数对飞行性能的影响,对两次点火固体火箭发动机结合弹道同时最佳化问题给出了仿真结果.